GSM 900 WCDMA 3G 2100MHz Cell Phone Signal Booster Indoor High Gain Dual Band Signal Repeater Amplifier

 
Product Description
 

There are millions of very small areas (10~150 square meters) where people work or live in and suffer from very poor or no mobile signals. People are seeking a cheap and immediate solution that would allow them have clear phone calls or higher speed broad band. However most of the current repeater solutions usually have larger coverage size, which is cost effective. ST-GW27A is specifically designed as a "CHEAP" solution to meet this request.

1. The consumer repeater is an ideal solution for providing a costeffective improvement in cellular in-building coverage of a home, office, restaurant or building, in the quickest time possible.

2. Manual gain control (MGC total 31dB range with all DIP switches for each link) available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.

3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.

4. Auto shut off function available for both uplink and downlink to avoid deep self-oscilation from jamming the towers, saving your trouble from operators.

 

5. It supports two systems of GSM900 and 3G WCDMA 2100mhz.
 

Features of Dual band repeater ST-GW27A

 

ST-GW-27A Dual band repeater is to support any two mobile band existing in the world to help end users to improve mobile signals for much better phone call quality and smoother data transmission. It is designed to support coverage area up to 100-2000 square meters with proper engineering. Below are the main features.

 

1. The consumer repeater is an ideal solution for providing a cost effective improvement in cellular in-building coverage of a home, office, restaurant or building, in the quickest time possible.

 

2. Manual gain control (MGC) available for both uplink and downlink to adjust the gain value for proper coverage duringinstallation or maintenance.

 

3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.

 

4. Auto shut off function available for both uplink and downlink to avoid deep self-oscilation from jamming the towers, saving your trouble from operators. 

 

5.Wide band feature enables all devices operating within the wide frequency range of the repeater to see an improvement in performance.

 

6.Multiple phones and other handheld devices throughout a building can benefit from a wireless repeater.

 

7.Supports up to (180) users / calls simultaneously.

 

8.Extended phone battery life. (Your phone does not need to put out as much power due to improved reception.)

 

 

Application place
 
Application places of signal boosters
 
1. For large buildings such as stores, offices, school, company headquarters, warehouse and so on
2.  For small Houses that in remote place
3.  For vehicle (Car, Truck, RV)
4.  For public place, for example: Metro, Tunnel, Hotel, Pub, Supermarket, etc
5.  Gas Station, Gas Filled Station, Oil Field, Oil Depot
 
 
Specification
 

 

 

   
Full kits info
 
The full set may include (the accessories is up to your choice)
ST repeater main unit
Outdoor antenna
Indoor antenna
Feeder line
Power Splitter (when there are more than 2 indoor antennas)
Connector(N connector, F connector, N to F connector etc)
 
 


 
Installation
 
Installation Steps
 
1 Use of mobile phones at the top of building or around the building to check out the direction of the strongest signal location.
2 Select the appropriate location, and put the outdoor antenna fix to the wall or bracket.
3 Select the appropriate location of the indoor locations (this location could be best that close to power and a well-ventilated place, sun-proof, rain-proof) Install the Indoor Repeater, and fix on wall or bracket.
4 Put the outdoor antenna to the "OUT DOOR" connector and tightens it. Thus complete the outdoor antenna and Repeater's connection.
5 After setting the suitable location of the indoor antenna and the installation place, then fixing the antenna.
6 The indoor antenna and Repeater wiring, the indoor antenna connect one end of the interface and on the other end connect Repeater's "IN DOOR" port.
 
 
Installation sketch

 

 
 
Adjusting illustration
A  Proper adjustment of the antenna's position so that the best communication quality and signal strength.
B  Indoor antenna installed location should stay away from one end of the outdoor antenna, so as not to interfere with each other. (The outdoor antenna away from the indoor antenna placed above a layer of floor is better)
C  Indoor antenna should be installed above the height of 2 m of the ceiling or the corner.
D  Using the waterproof tape to wrap where has connector, so as to avoid oxidation caused by moisture, resulting in reduced indoor signal coverage.
 
  Our service:

Single band repeater with output power 10-33dBm

 

GSM900mhz , CDMA 850mhz ,  DCS 1800mhz, PCS 1900mhz ,3G WCDMA 2100mhz , 4G LTE 2600mhz

 

Dual band Signal repeater with output power 10-27dBm

 

GSM900+1800mhz ,GSM900+ 3G 2100mhz ,GSM900 4G 2600mhz Dual band

850+1900mhz ,3G 2100+4G 1800mhz ,3G 2100+4G LTE 2600mhz

 

Tri band signal repeater with output power 10-27dBm

 

GSM 900 1800 2100mhz ,GSM900 2100 2600mhz ,1800 2100 2600mhz Tri band

 

850 1900 2600mhz Tri band

 

 

1. Sample within 1-3  working days

2. Wholesales Orders : 3-7 working days according various quantities

3. Bulk order : 5-10  working days after the full payment 

1. 2 years warranty for the products.

2. Please send back the defective goods which are within the warranty period, we will repair them or send you new one for free

3. If it is the sample or only few pcs accessories (the fee is less or around shipping fee) are damaged, please send us some pictures and video about it need to confirm your problem, then we will send you free new goods instead