Basic Info.
Lightning Protection
With Lightning Protection
Place of Origin
Guangdong, China
Cellular Networks
2g/3G/4G Lte
Working Frequency
2600MHz
Feature
with Alc/AGC/Mgc Function
Product Description
Signal booster for home use 4G 2600mhz signal repeaters
A cell phone signal booster (also known as cellular repeater or amplifier) is a device that boosts cell phone signals to and from your mobile phone whether at home or office or in any vehicle.
It does this by taking the existing cellular signal, amplifying it, and then broadcasting to an area in need of better reception.
If you're experiencing dropped calls, slow or lost internet connection, stuck text messages, poor voice quality, weak coverage, low bars, and other cell phone reception problems, a cell phone signal booster is the best solution that produces definite results.
We provides signal boosters kits for any Homes, Offices, Cars, RV's, Boats and more. All amplifier kits come with Indoor and Outdoor Antennas, Cables, Power adapters and more. ST-4G 2600mhz signal repeaters Features:1. With unique appearance design, have good cooling function2. With MGC function,(Manual Gain Control), Customer can adjust the Gain as needed ;3. With DL signal LED display, help to install the outdoor antenna at the best state;4.With AGC and ALC, make repeater work stable . 5.PCB with isolation function ,make UL and DL signal not influence each other,6.Low intermodulation, high Gain ,stable Output power ST-4G 2600mhz signal repeaters is to support any two mobile band existing in the world to help end users to improve mobile signals for much better phone call quality and smoother data transmission. It is designed to support coverage area max can up to 600 square meters with proper engineering. Below are the main features.1. The consumer repeater is an ideal solution for providing a cost effective improvement in cellular in-building coverage of a home, office, restaurant or building, in the quickest time possible.2. Manual gain control (MGC) available for both uplink and downlink to adjust the gain value for proper coverage during installation or maintenance.3. To maintain safe and specific output signal levels and give alarms on self-oscillation, the repeater has built-in AGC and ALC circuits, which can automatically control the gain of the repeater depending upon the strength of input signals.4. Auto shut off function available for both uplink and downlink to avoid deep self-oscilation from jamming the towers, saving your trouble from operators. 5.Wide band feature enables all devices operating within the wide frequency range of the repeater to see an improvement in performance.6.Multiple phones and other handheld devices throughout a building can benefit from a wireless repeater.7.Supports up to (500) users / calls simultaneously.8.Extended phone battery life. (Your phone does not need to put out as much power due to improved reception.Specification of ST-4G 2600MHZ signal repeaters:
Electrical specification | Uplink | Downlink |
Frequency Range | LTE 4G | 2500-2570MHZ | 2620-2690MHZ |
Max .Gain | ≥ 70dB | ≥ 75dB |
Max .Output Power | ≥ 24dBm | ≥ 27dBm |
MGC ( Step Attenuation ) | ≥ 31dB / 1dB step |
Automatic Level Control | ≥ 20dB |
Gain Flatness | GSM & CDMA | Tpy≤ 6dB(P-P); DCS,PCS ≤ 8dB(P-P) |
WCDMA | ≤ 2dB/ 3.84MHz,Full Band ≤ 5dB(P-P) |
Noise Figure | ≤ 5dB |
VSWR | ≤ 2.0 |
Group Delay | ≤ 1.5μs |
Frequency stability | ≤ 0.01ppm |
Spurious Emission & Output inter-modulation | GSM Meet ETSI TS 151 026 V 6.1.0 |
WCDMA Meet 3GPP TS 25.143 ( V 6.2.0 ) |
CDMA Meet IS95 & CDMA2000 |
WCDMA System | Spurious Emission Mask | Meet 3GPP TS 25.143 ( V 6.2.0 ) |
Modulation Accuracy | ≤ 12.5% |
Peak Code Domain Error | ≤ -35dB@Spreading Factor 256 |
CDMA System | Rho | ρ > 0.980 |
ACPR | Meet IS95 & CDMA2000 |
Mechanical Specifications | Standard |
I /O Port | N-Female |
Impedance | 50 ohm |
Operating Temperature | -25ºC~+55ºC |
Environment Conditions | IP40 |
Dimensions | 155x112x85mm |
Weight | ≤ 1.50Kg |
Power Supply | Input AC90-264V,output DC 5V / 3A |
LED Alarm | Standard |
Power LED | Power Indicator |
UL LED | Be lighted when there is phone calling |
DL 1 | Be lighted when Outdoor signal is -65dB |
DL 2 | Be lighted when Outdoor signal only -55dB |
DL 3 | Be lighted when Outdoor signal only -50dB |
Complete set information:
1. main unit repeater ST-G27
2.outdoor antenna
3. indoor antenna
4. cables
5.power suppier
The installtion of the Repeater
Outdoor antenna ( for receiving the signal from the BTS ) + Cable ( transfering the received signal) + Repeater ( for amplifying the received signal) + cable( for transfering the amplified signal) + indoor antenna( for shooting the amplified signal)
(Note : Omni indoor antenna is 3dBi,it can work with about 200m2 . If need repeater coverage larger area , need add moreantenna,the HPC-G27 Max can work with 8pcs indoor antenna. ( when add antenna ,please remember to take splitters Installation steps Step 1 Start by taking your phone up to the roof or other location outside to find where the signal is strongest.Step 2 Temporarily mount the Outdoor (outside) antenna in that location. You may need to adjust and move the antenna later.Step 3 Run coaxial cable into the building to a convenient loaction (attic, etc.) where you can also get standard power for the Signal Repeater.Step 4 Place the Signal Repeater in that location and connect the coaxial cable to the Outdoor Side of the Signal Repeater and the Outdoor antenna.Step 5 Mount your Indoor (inside) antenna in a productive location. You may need to adjust or move the antenna later. More notes on Indoor antennas and patterns here.Step 6 Connect coaxial cable between the Indoor antenna and the Signal Repeater output port.Step 7 Power up the system and check for signal inside the building. If needed, tune system by moving and or pointing the Outdoor and Indoor antennas until they get the most signal possible.Step 8 Secure all antennas and cables, securely mount the Signal repeater and clean up the installation. Of course there are still a few more things to consider but in general, this is the basic procedure. For more information, please contact us.
Related Products
Single band repeater with output power 10-33dBm
GSM900mhz , CDMA 850mhz , LTE 700mhz , LTE DCS 1700mhz , 3G WCDMA 2100mhz , PCS 1900mhz Single band signal repeater
Dual band Signal repeater with output power 10-27dBm
GSM900mhz 1800mhz Dual band
GSM900 3G 2100mhz Dual band
GSM900 4G 2600mhz Dual band
CDMA 850 1900mhz Dual band
CDMA 850 3G 2100mhz Dual band
DCS 1800 3G 2100mhz Dual band
Tri band signal repeater with output power 10-27dBm
GSM 900 1800 2100mhz Tri band
GSM900 2100 2600mhz Tri band
1800 2100 2600mhz Tri band
850 1900 2600mhz Tri band
About Us :
Shenzhen Sai Tong Tian Electronic Technology Company Limited is located in the well-known high-tech city, Shenzhen of china, founded in January 2007. We are specialized in manufacturing communication products including Signal Repeater/booster/amplifier and Antenna.
We mainly provide mobile signal repeater,TMA,TMB (tower mounted amplifier/booster),booster,and antennas of GSM,CDMA,DCS,WCDMA/3G,IDEN,TETRA,CDMA450M,GSM1900M. We obtained ISO9001, CE, FCC and RoHS certificates and all of our products are strictly tested by QC department.
And with the high speed development for about 6 years, Shenzhen Sai Tong Tian has exported nearly 90% products to over 50 countries, such as Western Europe, South America, Southeast Asia, Middle East and Africa.
For many years, we keep our enterprise faith "Be honest people, Do best thing" and have best service and best products for our customers. We are always working hard, and sincerely hope to create the beautiful future together with you.
Address:
5th, Building 105, Liantang Industry, Luohu District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Consumer Electronics
Management System Certification:
ISO 9001
Company Introduction:
Shenzhen Sai Tong Tian Electronic Technology Company Ltd We are manufacturer of Mobile Signal Boosters. With 10 years experience and thousands of happy customers we pride ourselves on our customer service and the quality of our products.
Our mission is to provide our customers worldwide with solutions for poor mobile coverage for any carrier in the world. Whether a client seeks to cover 100 sq meters, 1000 sq meters, 10000sq meters, a warehouse, building or large facility we have the solution. In addition to the retail products available on our website, our team of engineers can provide customised solutions for any application.
We offer 100% free support with the purchase of any unit on our site. Our exceptional customer service has made us a leader in the mobile cellular reception industry.
We also stand by the quality of our products and offer a 30-day money back guarantee on all of our merchandise. Please feel free to call us with any questions you might have. It would be our pleasure to assist you!
We want the process of shopping with stsignalbooster.en.made-in-china.com to be as simple and care free as possible, this is why we have designed the site to be informative, secure and easy to use.